Hack WIFI Network Dumpper And JumpStart 2017 ((FULL))

Hack WIFI Network Dumpper And JumpStart 2017 ((FULL))

Click Here --->>> https://shurll.com/2tyG60

How to Hack WIFI Network with Dumpper and JumpStart 2017

Do you want to know how to hack any WIFI network with just a few clicks If yes, then you are in the right place. In this article, I will show you how to use Dumpper and JumpStart 2017, two free tools that can help you crack WPS-enabled WIFI networks easily and quickly.

WPS (Wi-Fi Protected Setup) is a feature that allows users to connect to a WIFI network without entering a password. However, it also has a security flaw that makes it vulnerable to brute-force attacks. This is where Dumpper and JumpStart come in handy. Dumpper is a software that scans for WPS-enabled WIFI networks and shows their PIN codes. JumpStart is a software that connects to the WIFI network using the PIN code obtained by Dumpper.

Before we start, you will need to download and install Dumpper and JumpStart 2017 from here. You will also need a wireless adapter that supports monitor mode and injection. You can check if your adapter is compatible here. Once you have everything ready, follow these steps:

Launch Dumpper and go to the \"WPS\" tab. Click on the \"Scan\" button to scan for available WIFI networks.

Select the WIFI network that you want to hack from the list. Make sure it has a green tick mark next to it, which means it is WPS-enabled.

Click on the \"JumpStart\" button at the bottom right corner of the window. This will launch JumpStart and automatically fill in the network name and PIN code.

Click on the \"Connect\" button in JumpStart and wait for a few seconds. If everything goes well, you should see a message saying \"Connected successfully\".

Congratulations! You have hacked the WIFI network. You can now access the internet or browse the network resources.

Note: This method only works for WPS-enabled WIFI networks. It does not work for WPA/WPA2-PSK networks that require a password. Also, hacking WIFI networks without permission is illegal and unethical. This article is for educational purposes only. I am not responsible for any misuse or damage caused by this method.

Conclusion

In this article, I have shown you how to hack WIFI network with Dumpper and JumpStart 2017. This is a simple and effective way to crack WPS-enabled WIFI networks without using any password. However, you should always respect the privacy and security of other people's networks and use this method only for educational purposes.

If you found this article helpful, please share it with your friends and leave a comment below. Also, if you have any questions or suggestions, feel free to contact me. Thanks for reading!

How to Protect Your WIFI Network from WPS Attacks

Now that you know how to hack WIFI network with Dumpper and JumpStart 2017, you might be wondering how to protect your own WIFI network from such attacks. The best way to do that is to disable WPS on your router. WPS is a convenient feature, but it also compromises your security. By disabling WPS, you will force anyone who wants to connect to your WIFI network to enter a password.

To disable WPS on your router, you will need to access its web interface. The exact steps may vary depending on your router model and firmware, but generally, you will need to do the following:

Connect your computer to your router using an Ethernet cable or WIFI.

Open a web browser and type the IP address of your router in the address bar. The default IP address is usually 192.168.1.1 or 192.168.0.1. If you don't know the IP address of your router, you can find it by running the command \"ipconfig\" in Windows or \"ifconfig\" in Linux or Mac.

Enter the username and password of your router. The default username and password are usually \"admin\" and \"admin\" or \"admin\" and \"password\". If you have changed them, use the ones that you have set.

Once you are logged in, look for the WPS settings in the web interface. They may be under the \"Wireless\", \"Security\", or \"Advanced\" sections. Find the option to disable WPS and click on it.

Save the changes and reboot your router.

Congratulations! You have disabled WPS on your router. You have increased the security of your WIFI network and prevented WPS attacks.

Other Ways to Hack WIFI Network

Dumpper and JumpStart 2017 are not the only tools that can help you hack WIFI network. There are many other tools and methods that can achieve the same goal. Some of them are:

Aircrack-ng: A suite of tools that can crack WEP and WPA/WPA2-PSK networks using various techniques such as packet capture, injection, replay, and brute-force.

Reaver: A tool that can crack WPS-enabled networks using a brute-force attack on the PIN code.

Wifiphisher: A tool that can create fake WIFI access points and trick users into connecting to them and entering their passwords.

Kali Linux: A Linux distribution that comes with a collection of tools for hacking WIFI networks and other security-related tasks.

These tools and methods are more advanced and require more technical skills and knowledge than Dumpper and JumpStart 2017. They also have different advantages and disadvantages depending on the situation and the target network. If you want to learn more about them, you can find plenty of tutorials and guides online. 061ffe29dd