Symphony I10 Dead Recovery Firmware Flash File MT6580 DA Fix High Quality
Symphony I10 Dead Recovery Firmware Flash File MT6580 DA Fix ===== https://urluso.com/2tBumC
How to Fix Symphony i10 Dead Boot Issue with MT6580 DA File
Symphony i10 is a popular Android smartphone that runs on a MediaTek MT6580 chipset. However, some users may encounter a dead boot issue after flashing the wrong firmware or performing a hard reset. This means that the phone does not power on or boot into recovery mode, and only shows a black screen or a red light.
Fortunately, there is a way to fix this problem using a special file called MT6580 DA (Download Agent) file. This file helps the flash tool to communicate with the phone and bypass the secure boot protection. By using this file, you can flash the correct firmware and revive your Symphony i10 from the dead boot state.
In this article, we will show you how to download and use the MT6580 DA file for Symphony i10 and how to flash the stock firmware using SP Flash Tool. Follow the steps below carefully and make sure you have a backup of your data before proceeding.
Step 1: Download and Install Drivers
The first step is to download and install the necessary drivers for your Symphony i10 and your computer. You will need the MediaTek USB VCOM drivers and the Symphony i10 USB drivers. You can download them from the links below:
MediaTek USB VCOM drivers
Symphony i10 USB drivers
After downloading the drivers, extract them to a folder on your computer and follow the instructions to install them. You may need to disable driver signature verification on Windows 8 or 10 before installing the drivers.
Step 2: Download and Extract MT6580 DA File and Firmware
The next step is to download and extract the MT6580 DA file and the stock firmware for your Symphony i10. You can download them from the links below:
MT6580 DA file
Symphony i10 stock firmware
After downloading the files, extract them to a folder on your computer using WinRAR or 7-Zip. You should see a file named MT6580_Android_scatter.txt in the firmware folder and a file named MTK_AllInOne_DA.bin in the DA file folder.
Step 3: Launch SP Flash Tool and Load Files
The third step is to launch SP Flash Tool and load the files that you extracted in the previous step. You can download SP Flash Tool from the link below:
SP Flash Tool
After downloading SP Flash Tool, extract it to a folder on your computer and run flash_tool.exe as administrator. You should see a window like this:
Now, click on Choose in front of Scatter-loading File and browse to the firmware folder that you extracted earlier. Select MT6580_Android_scatter.txt and click Open. You should see a list of files loaded in SP Flash Tool like this:
Next, click on Choose in front of Authentication File and browse to the DA file folder that you extracted earlier. Select MTK_AllInOne_DA.bin and click Open. You should see a green tick mark next to Authentication File like this:
Step 4: Connect Your Phone and Start Flashing
The final step 061ffe29dd